1.山东注塑加工确定紧急停止按制能切断油泵部份马达电源。Shandong injection molding process to determine the emergency stop according to the system can cut off the oil pump motor power.

2.山东注塑加工应该保持注塑机和机身四周清洁。Shandong injection molding machine should be maintained around the injection molding machine and clean.

3.检查温度针与发热筒是否操作正常。Check whether the temperature needle and the heating cylinder operate properly.

4.检查安全门拉开时能否终止锁模。分别用手动、全半自动操作锁模进行测试。Check whether the safety door can be stopped when the door is opened. Manual and fully automatic operation of the lock mode test.

5.山东注塑加工的工作人员应该检查模具是否稳固安装在锁模头板及移动模板上。Shandong injection molding staff should check whether the mold is firmly installed in the mold head plate and mobile template.

6.检查各冷却运水喉管是否有漏水现象，收紧漏水的喉管。Check the cooling water pipes are leaking phenomenon, tighten the leakage of the throat.

7.检查所有罩板是否稳固安装于机器上。Check that all panels are firmly installed on the machine.

8.山东注塑加工开机运行一段时间后，检查油温是否上升超过摄氏50度。检查供应冷却的冷却运水温度，油温应保持30-50摄氏度。Shandong injection molding machine running after a period of time, check the oil temperature is rising more than 50 degrees celsius. Check supply cooling water temperature, oil temperature should be maintained at 30-50 degrees celsius.

9.山东注塑加工工作人员应该检查机械安全锁是否操作正常。Shandong injection processing staff should check whether the normal operation of mechanical safety lock.